Universal Repeater Screen - ZyXEL Communications NBG4615 User Manual

Table 34 Status Screen: Universal Repeater Mode (continued)
LABEL
Packet Statistics
WLAN Station Status
Interface Status
Interface
Status
Rate
11.5.0.1 Navigation Panel
Use the menu in the navigation panel to configure NBG4615 features in Universal Repeater
mode.
The following screen and table show the features you can configure in Universal Repeater mode.
Figure 57 Menu: Universal Repeater Mode
Refer to Table 31 on page 69

11.6 Universal Repeater Screen

Use this screen to enter the SSID and select the wireless security mode used by the wireless device
to which you want to connect. Go to Configuration > Wireless LAN > Universal Repeater to
open the Universal Repeater screen. The screen varies depending on security mode.
NBG4615 User's Guide
DESCRIPTION
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN Station Status screen
49). Use this screen to view the wireless stations that are currently associated to the
NBG4615.
This displays the NBG4615 port types. The port types are: LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
For the LAN ports, this displays the port speed or N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
for descriptions of the labels shown in the Navigation panel.
Chapter 11 Universal Repeater Mode
(Section 6.6 on page
(Section 6.7 on page
48).
85