Environmental Conditions; Before Applying Power; Table 2-1 Environment Requirements - Agilent Technologies N9360A Installation Manual

WARNING
WARNING

Environmental Conditions

CAUTION

Before Applying Power

Agilent N9360A Multi UE Tester Installation Guide
DO NOT REMOVE RACK PANELS OR INSTRUMENT COVERS. Operating
personnel must not remove any rack panels or instrument covers.
Component replacement and internal adjustments must be made only by
qualified service personnel. Products that appear damaged or defective
should be made inoperative and secured against unintended operation
until they can be repaired by a qualified service personnel.
The protection provided by the N9360A system may be impaired if
the system is used in a manner not specified by Agilent.
The N9360A Automotive Electronics Functional Test System is designed
for indoor use only.
Table 2-1
ments.

Table 2-1 Environment Requirements

Environment Conditions
Maximum Altitude
Temperature (Operation)
Maximum Relative Humidity
This product is designed for use in Installation Category II and
Pollution Degree 2, per IEC 61010-1 and 664 respectively.
Verify that the product is set to match the available line voltage and all
safety precautions are taken. Note the external markings of the
instruments described in
Markings".
Safety and Regulatory Information
shows general environmental require-
Requirements
2000 meters
° °
5 C to 40 C
The test system is designed to operate
in the range from 5% to 80% relative
humidity (non-condensing).
"Safety Symbols and Regulatory
2
2-3