Timebase Setup - Fluke CombiScope PM3370B User Manual

GETTING STARTED

3.7 TIMEBASE SETUP

The next step is the adjustment of the main timebase controls (TIME/DIV, X
POSition, and MAGNIFY keys).
Figure 3.6 Timebase setup
Step 1 Press the AUTOSET key.
Step 2 Use the TIME/DIV keys on the right hand side of the instrument to
decrease or increase the number of periods of the signal on the
screen.
Step 3 Select a timebase of 1 ms/div.
Step 4 Press AUTO RANGE and see the signal display change to a more
suitable timebase. The AUTO RANGE function automatically selects a
timebase that displays 2 to 6 signal periods.
Step 5 Press the ANALOG key to switch the scope to the analog mode.
Step 6 Turn the X POS control to shift the signal horizontally (left or right)
across the screen.
1 2 3 4
MTB 500 s
TIME/DIV
3 - 11
MAGNIFY X POS
AUTO
RANGE
TIME/DIV
s ns
VAR
ST6435
9312
MTB 100 s
ST6683