Fluke CombiScope PM3370B User Manual page 184

5 - 64
AUTO SETTING (USERPROGRAM)
CALIBRATION COMPLETED
CALIBRATION ERROR ...
CH. 50 OVERLOAD
DESTINATION PROTECTED
FUNCTION ONLY IN ANALOG
HARDCOPY ABORTED
HARDCOPY BUSY : ..% DONE
HARDCOPY DONE
INVALID REGISTER SELECTION
INVALID SELECTION
KEY INACTIVE WHEN STOPPED
NO AVERAGE IN ROLL MODE
NO BATTERY BACKUP
FUNCTION REFERENCE
Indicates that instrument performs an
userprogrammed autoset.
Function 'AUTOSET USERPROG'.
Autocalibration is completed.
Function 'CALIBRATION AUTOCAL'.
Autocal not successfully completed.
Function 'CALIBRATION AUTOCAL'.
Input voltage at 50
too high.
Function 'INPUT IMPEDANCE'
MATH1 (2) is activated while register M1
(2) is protected.
Functions 'ADD', 'FILTER',
'MATHEMATICS', 'MULTIPLY' and
'SUBTRACT'.
Function activated in digital mode, but is
only present in analog mode.
Function 'ANALOG MODE'.
Print or plot action has been aborted.
Function 'PRINTING AND PLOTTING'.
Instrument is busy with a print/plot action.
Function 'PRINTING AND PLOTTING'.
Print/plot or abort action has been done.
Function 'PRINTING AND PLOTTING'.
Copying to the same register is not
possible.
Selected source is not valid.
FunSELECTIONctions 'ADD', 'FILTER',
'MATHEMATICS', 'MULTIPLY' and
'SUBTRACT'.
Pressed key is inactive when trace is
frozen.
Function 'RUN/STOP'.
Average and Roll modes cannot be
combined.
Function 'AVERAGE' and TB MODE'.
Battery backup not possible because of
absence of batteries.
input impedance is