Fluke CombiScope PM3370B User Manual page 141

FUNCTION REFERENCE
CURSORS
In this mode, both voltage and
time cursors are active. The
TRACK and controls operate as
in VOLT or TIME mode, as
selected with the CONTROL key.
Key sequence:
TRACK
Remote commands:
CPL: QM (command to query measured values)
Refer to Chapter 6 for full details.
TRACK
Toggle function softkey to switch between cursors on and off.
Toggle function softkey to switch between volt, time or both
cursors.
Softkey pair to select CH1 or CH2 for measurements. Selects in
digital mode also stored traces.
Toggle function softkey to switch between volt and time cursors
for positioning. This selection is usable only in the 'both' cursor
mode.
Control to shift both cursors simultaneously, or to shift the
track cursor only. Selection in the CURSORS READOUT
menu determines one of the two.
Control to shift the
ch2 T=... V=...
TRACK
cursor.
5 - 21
BOTH
CURSORS
on off
ch1
ch2
-
-
CONTROL
READOUT
ST6554
9303