Fluke CombiScope PM3370B User Manual page 52

HOW TO USE THE INSTRUMENT
MENUS
A menu appears when a key with blue text is pressed.
The menu functions can be selected by pressing the blue softkeys to the right side
of the screen.
- Press the ANALOG key to select the digital mode.
- Press the DISPLAY key to activate the menu.
DISPLAY
WINDOWS
on off
VERT
MAGNIFY
off
T
X vs Y
TEXT
dots
linear
sine
ST7415
9312
You can turn off the text by pressing the TEXT OFF key. This can be done to free
up the display area.
- Press the TEXT OFF key three times.
Observe that the text mode follows the following sequence: menu off, settings off,
both on.
Each menu starts with a menu name, which
corresponds with the key that was used to select the
menu. This is sometimes followed by a second name of
the softkey that initialized a submenu.
The windows function can be switched on and off by
pressing the corresponding blue softkey.
T
indicates that a selection must be made with the
TRACK control.
The arrow ( ) behind TEXT indicates that there is a
submenu.
The bottom softkey switches (toggles) between the
three functions.
4 - 7
TEXT OFF