Fluke CombiScope PM3370B User Manual page 140

5 - 20
CURSORS
The time cursors are used for time
measurements. The example shows the
required softkey settings for period
measurements. The cursor positioning
with the TRACK and
shown.
CURSORS
The volt cursors are used for
voltage measurements. When
more than one channel is on, the
desired channel for voltage
readout must be selected with the
ch1, ch2 pair of softkeys. When
more than one channel is on, the
desired channel for voltage
readout must be selected with the
ch1, ch2 pair of softkeys. In digital
mode stored traces can
also be used for voltage measurements. The figure shows the required settings.
The cursor positioning with the TRACK and
example shows how peak-peak voltage measurement is done.
controls is also
TRACK
FUNCTION REFERENCE
ch... T=...
TRACK
ch2 V=...
controls is also shown. The
TIME
CURSORS
off
on
#
READOUT
ST6553
9303
VOLT
CURSORS
on off
#
ch1
ch2
-
-
READOUT
ST6552
9303