Setup Menu (Main Menu)
The Product lets you set other, less frequently used, parameters. The Setup
menu is used to set these parameters. Push to open the Setup menu. If
output terminals are connected, they will be disconnected and the subsequent
display is shown:
Push ,, or turn the Rotary Knob to browse the menu options. Push the
Select softkey or push in the Rotary Knob to select a highlighted item. Push the
Exit softkey to leave the selected menu level.
New settings are activated once you exit the Main menu and saved when the
Product is switched off.
The Main menu shows these items:
•
General – general Product settings (language, display, beeper, calibration
password, time, date, device information)
•
Interface – parameters of the Product remote control
•
Calibrator – parameters of signal generation
•
Meter – parameters of the multimeter
•
Calibration – Product calibration process and data
Front-Panel Operation
Setup Menu (Main Menu)
hoa001.jpg
4
4-3