Fluke CombiScope PM3370B User Manual page 175

FUNCTION REFERENCE
Real-time clock
The real-time clock is used to make time stamps on a hardcopy. Hardcopies will
be stamped with two timestamps: the time of operation of the HARD COPY key
and the time of trigger of the acquisition.
Adjust block
Date format
Confirm
Key sequence:
PRINT&
UTILITY
PLOT&CLK
Three softkeys are used to adjust the clock. The
softkey in the middle determines if the adjustment
is done for day, month, year, hour, minutes or
seconds. The item to be adjusted is displayed
intensified. The adjustment is done with the upper
and lower softkey. The upper softkey s gives an
increase, the lower softkey t a decrease.
The date can be selected to be in the European
format (day:month:year), USA format
(month:day:year) or Japanese format
(year:month:day).
The adjusted time becomes active after pressing
the softkey ENTER & RETURN.
print
plot clk
TRACK
LAYOUT
...
IEEE
RS232
ST7410
9312
Toggle softkey to select printer, plotter or
clock menu.
Control to select printer (plotter) type.
Access to LAYOUT menu for printer or
plotter.
Toggle softkey to select IEEE or RS-232
interface (only visible if IEEE interface is
present).
5 - 55