Fluke CombiScope PM3370B User Manual page 268

THE CPL PROTOCOL
hex dec
13 19
14 20
20 32
21 33
31 49
32 50
33 51
41 65
42 66
50 80
51 81
52 82
60 96
70 112
F0 240
It is NOT necessary to send all strings to the oscilloscope, when a setting must
be changed.
meaning
Events Trigger Delay settings
(event counter low/high, trigger level low/high, trigger source, event
bits, trigger coupling)
SCPI Trigger Settings
Cursor settings
(V cursors on/off, T cursors on/off, rise time on/off, control V/T, Vpp
on/off, rise time 10-90/20-80, readout Vpp/V+V-, cursors on/off, V
readout delta/absolute/ratio, T readout delta/1/delta/ratio, channel
FFT read out dBm/dB V/Vrms, FFT reference impedance)
Cursor autosearch settings
(on/off, flank selection, reference selection, abs/rel)
Measurement 1 settings
Measurement 2 settings
(Measure bits, measure type, source 1 low/high, source 2 low/high)
Pass/fail test settings
(on/off, define, action, menu on/off, hardware on/off)
Mathematics 1 settings
Mathematics 2 settings
(Mathematics bits, mathematics type, source 1 low/high, source 2
low/high, scale low/high, scale minimum low/high, offset low/high,
window width low/high)
Display settings
(settings display on/off, ground level indicator on/off, trigger level
indicator on/off, dots join on/off, x versus Y on/off, status view
on/off, backup status view, window on/off))
Trace intensity settings
(analog trace intensity low/high, mtb/dtb intensity ratio)
Display trace position setting
Setup label text
(max 22 characters)
Real time clock setting
Special node for service purposes
(SCPI trigger source low/high)
(X position, Y position)
(format)
6 - 51