Fluke CombiScope PM3370B User Manual page 229

6 - 12
GO to REMOTE
Purpose:
Puts the oscilloscope in the Remote State. In the Remote State none of the
oscilloscope functions are accessible via the front panel buttons and knobs.
Going back to the Local State is achieved by sending the Go to Local (GL)
command or by pressing the STATUS/LOCAL key on the frontpanel (Refer also
to "Local Lockout" and "Go to Local").
Command:
"GR"
Response:
acknowledge
Example:
100 PRINT #1,"GR"
110 INPUT #1,ACK
Local, Remote, Remote+Local Lockout States
power-on
Local State
CR
CR
:'Send command
:'Sync on acknowledge
"Go to Remote"
"Go to Local"
"Reset Instrument"
<STATUS/LOCAL button>
"Go to Local"
"Reset Instrument"
THE CPL PROTOCOL
Remote State
"Local Lockout"
Remote with
Local Lockout
State
GR