• To clear a DSS, speed dial, autodial or feature button
assignment,
1. SELECT OPTIONS.
2. SELECT NEXT until FEAT appears.
3. SELECT FEAT.
4. SELECT NEXT until CLEAR is displayed.
5. SELECT CLEAR.
6. PRESS programmable button to clear.
7. SELECT EXIT to end.
6.4.1 SPECIAL PURPOSE FEATURE BUTTONS
Response Message Button
This program lets you set up a button to be used for making a non-
verbal response to a SOHVA or an intercom call. The response
appears in the display of the calling station.
• To assign a button for nonverbal response:
1. PRESS INTERCOM AND DIAL **1.
2. PRESS the programmable button you want to use for message
access.
3. DIAL 5.
4. DIAL a message number (0 through 9).
Note: Programmed messages available for use are created by the
system attendant and are listed in a table on page 51 .
5. PRESS SPEAKER to end.
August, 03
DSUII LCD Speakrphone User's Guide
Comdial
63