Do Not Disturb Condition - Comdial DSU II SCS84125J Station User's Manual

Other Features

7.13 Do Not Disturb Condition

This feature keeps calls from ringing at your LCD speakerphone and
makes your station appear to be busy to intercom calls. As a reminder,
a station that is set in Do Not Disturb mode will display this infor-
mation on the LCD.
• To enable DND, proceed as follows:
1. SELECT OPTIONS.
2. SELECT NEXT until the DND
option appears.
3. SELECT DND.
4. SELECT ON.
5. SELECT PREV.
6. PRESS SPEAKER to end.
• To disable the DND condition,
—REPEAT the above procedure, BUT SELECT OFF instead
of ON at step 4.
Note: Although it does not appear on your screen while Do Not
Disturb is displayed, the right interactive button will activate the
Options menu.
• To set a Do Not Disturb condition at your telephone when a
call rings at your station,
1. Hear ringing and notice incoming
call information in display.
2. PRESS programmed DO NOT
DISTURB button. (See Feature
Buttons section on page 54 for
programming instructions.)
82 Comdial
GCA70-281
Do Not Disturb
ON OFF<
Setting Do Not Disturb
24
MON
Do Not Disturb
Station with DND Set
August, 03
PREV
12:35