Automatic Set Relocation - Comdial DSU II SCS84125J Station User's Manual

7.10 Automatic Set Relocation

If your installer has equipped your system with automatic set relo-
cation, when you move your telephone to a new location, the system
gives you a choice (through a display prompt) as to whether you want
to keep your previous programming or use the programming in the
new location.
• To maintain the extension number and programming
features from the old location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND PRESS HOLD while
the light is still flashing (your telephone immediately assumed the fea-
tures from the previous location).
Note: If you do not select a button after installing the telephone,
the system automatically defaults to the programming from the pre-
vious location.
• To assume the extension number and programming features
from the new location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND DIAL
light is still flashing (your telephone immediately assumes the
features from the new location).
August, 03
DSUII LCD Speakrphone User's Guide
Comdial
#
while the
79