Comdial DSU II SCS84125J Station User's Manual page 67

Outside numbers and feature codes are
commonly referred to as autodial
numbers when stored at the program-
mable button locations; however, they
are referred to as personal speed dial
numbers when stored at the 10 keypad
number locations.
• To store an outside number or
a feature code as an autodial or speed dial number,
follow the display prompts and proceed as follows:
1. SELECT OPTIONS.
2. SELECT NEXT until ADIAL
and SDIAL is displayed.
3. SELECT ADIAL to choose auto-
dial programming, OR SDIAL to
choose speed dial programming.
4. PRESS programmable button or
keypad button to choose storage
location.
5. SELECT line button to dial out on or press INTERCOM.
6. DIAL any number up to 16 digits long (include * and # if
needed).
Note: You may need a pause between numbers to compensate for
differences in response time between your system and the host sys-
tem (ask your attendant about this). To store a pause, press HOLD,
then continue dialing. If your system is behind a host system that
needs a hookflash to access a feature, press TAP to store a hook-
flash, then continue dialing.
Also, you may need to erase the typed digits appearing in your
display to correct them. If you do, select BKSP once for each
digit to be removed.
August, 03
DSUII LCD Speakrphone User's Guide
Comdial
ADIAL SDIAL
Choosing Mode
Select Location
Selecting a Location
NEXT
PREV
57