Comdial DSU II SCS84125J Station User's Manual page 85

The pager mode allows an external paging device to sound all voice
announcements (all-call, zone paging, voice-announced intercom
calls) sent to your telephone.
Connectors on Bottom of Telephone
Line Cord
• Program the auxiliary jack enable/disable buttons (at any
blank programmable button location) as follows:
1. PRESS INTERCOM.
2. DIAL **1.
3. PRESS a programmable button.
4. DIAL a feature code:
94 = Headset Button,
95 = External Ringer Button,
96 = Tape Recorder Button,
97 = External Pager Button.
5. PRESS TRNS/CONF.
6. REPEATEDLY PRESS the programmable button AND
DIAL separate codes until all four buttons are programmed,
OR PRESS SPEAKER to end.
August, 03
DSUII LCD Speakrphone User's Guide
Auxiliary
Jack
Auxiliary Jack Location
Comdial
Handset
75