• To store a system feature
access code,
1. SELECT OPTIONS.
2. SELECT NEXT until
ADIAL and SDIAL options
appears.
3. SELECT SDIAL OR
ADIAL.
4. PRESS programmable button OR dial pad button (0–9) to
choose storage location.
5. PRESS INTERCOM.
6. DIAL access code associated with feature.
Note: Access codes are listed in Appendix A, Feature Access
Codes - DSU II Digital Expandable Systems found on page 89.
7. SELECT SAVE to store the num-
ber.
8. REPEAT previous steps until all
numbers are stored, OR SELECT
EXIT.
9. PRESS SPEAKER to end.
Note: The telephone system allows only one autodial number at a
programmable button; however, you can store an autodial number
or feature code at a second level of a location where a DSS is
already stored; just repeat the programming procedure
August, 03
DSUII LCD Speakrphone User's Guide
Comdial
Select Location
Choose a Location
Enter Number
Dial the Access Code
PREV
PREV
59