Nonverbal Messaging
5.3 LCD Message Delivery
You can set system-supplied messages to be received and displayed
by a calling LCD speakerphone.
• To turn message on,
1. PRESS INTERCOM.
2. DIAL *02.
3. DIAL the desired number from your message list. The default
messages of "Back At" and "Call" may be used:
For default message 1, which is "Back At," dial time in twelve-
hour format using the # as a colon.
For default message 2, which is "Call," dial the telephone num-
ber of where you will be.
4. PRESS SPEAKER to end message. Intercom light flashes
steadily.
• To turn off message and your intercom light,
1. PRESS INTERCOM.
2. DIAL #02.
52
Comdial
GCA70-281
August, 03