Special Purpose Feature Buttons - Comdial DSU II User Manual
Dsu ii digital expandable systems lcd speakerphone station
Hide thumbs
Also See for DSU II:
- System manual (450 pages) ,
- User manual (50 pages) ,
- System reference manual (136 pages)
Table of Contents
Advertisement
Programming
Special Purpose Feature Buttons
Response Message Button
This program lets you set up a button to be used for making a non-verbal response to
a SOHVA or an intercom call. The response appears in the display of the calling
station.
To assign a button for nonverbal response:
1. PRESS INTERCOM AND DIAL
2. PRESS the programmable button you want to use for message
access.
3. DIAL
4. DIAL a message number (
NOTE:
Programmed messages available for use are created by the system
attendant and are listed in a table on page 43.
5. PRESS SPEAKER to end.
Transfer Button
This program lets you set up a button to be used for transferring to a third party. Most
often, this feature is used for transferring calls you wish to retain to voice mail.
To assign a "transfer to voice mail" button:
1. PRESS INTERCOM AND DIAL
2. PRESS the programmable button you want to use.
3. DIAL
4. DIAL extension number of voice mail.
5. PRESS SPEAKER to end.
Subdued Off-Hook Voice Announce (SOHVA) Button
You can program a button at your station that you may press to enable the delivery of
a SOHVA call.
52
.
through
.
.
).
.
LCD Speakerphone Station User's Guide
GCA70-281
Advertisement
Table of Contents
