5.4 Assist Button Message Delivery
If you have preprogrammed an ASSIST button on your telephone,
you can use it to send an LCD message to your supervisor, asking for
assistance while you are on a call. See page 65 for instructions on
programming an ASSIST button.
• To send a message for assistance,
1. PRESS ASSIST button that you have programmed.
2. PRESS DSS/BLF of the telephone user you need help from.
(This is not necessary when the desired extension number was
stored along with the ASSIST button programming.)
3. If the assisting telephone is idle, a ring burst sounds and a mes-
sage appears in its display. If it is busy, the message appears
when it becomes idle.
August, 03
DSUII LCD Speakrphone User's Guide
Comdial
53