Speakerphone User Guidelines - Comdial DSU II SCS84125J Station User's Manual

Speakerphone Characteristics
Note: Pressing any button (mute, hold, etc.) on the speakerphone
while in full-duplex mode causes the system to perform the "speech
training" test again. For example, if you press MUTE while in full-
duplex mode, when you release the call from mute, the system will per-
form the entire "speech training" test again.

Speakerphone User Guidelines

• Both parties can not talk at the same time. You must wait for
silence out of your loudspeaker before talking. You must stop
talking to hear the other party.
• Background noise may prevent the sound-activated switches
from operating properly. Avoid placing the speakerphone where
it will detect sounds from typewriters, keyboards, printers,
paging systems, and other equipment.
• Speak slightly louder than normal and with a clear, authoritative
voice. For the microphone to best detect your voice, speak
within three feet of it and face the telephone.
• Raising the volume of the loudspeaker makes it easier for the
sound-activated switches in your telephone to select the distant
party's voice. Lowering the volume of the loudspeaker makes it
easier for the switches to select your voice.
• Since the system takes several seconds to provide the best
switching, constant sound patterns—such as elongating your
words and playing externally-supplied music—may prevent the
sound-activated switches from operating properly.
• Place the telephone on a hard surface and away from table
edges. Do not place the telephone in corners or enclosures. Do
not let obstructions come between you and the microphone.
Rooms with hard, flat surfaces that reflect sound may affect the
sound-activated switches.
110 Comdial August, 03