Call Parking; Handling Park Recalls - Comdial DSU II SCS84125J Station User's Manual

Advanced Call Handling

4.4 Call Parking

You can place an outside call on hold in the system so that it can be
answered from any station even though it does not have a line
appearance for the call. You accomplish this by placing the call in one
of nine park orbits, where the call remains until it is answered.
• To place an outside call on hold within the system where it
can be answered at any telephone in the system (parking a
call in orbit),
1. While on the call, PRESS INTERCOM AND DIAL *.
2. DIAL code for park location (orbit) ( 91 to 99 for orbit 1–9).
3. REMEMBER the code for later use OR MAKE IT KNOWN
to those who need to know in order to retrieve the call.
• To retrieve an outside call that was placed on hold in the
system (parked),
1. From any station, PRESS INTERCOM AND DIAL #.
2. DIAL code for orbit 1–9 ( 91 to 99 ).

4.4.1 HANDLING PARK RECALLS

When a parked call times out of the system, it will return to your tele-
phone in the form of a park recall.
• To answer a park recall,
—SELECT ANS. The call will then connect to your station.
• To place a park recall on hold at
your station,
—SELECT HOLD. After the call
remains on hold for a period of
time, it rings back to your tele-
phone as a hold recall.
44 Comdial
GCA70-281
Recall Li
HOLD ANS
A Park Recall
August, 03