Programming
Programming of the feature access buttons may require several selec-
tions involving many LCD screens. If an abbreviation used is not
familiar to you, consult Appendix B, Display Abbreviations - DSU II
Digital Expandable Systems on page 93.
• To create standard feature access buttons proceed as
follows:
1. SELECT OPTIONS.
2. SELECT NEXT until FEAT
appears.
3. SELECT FEAT.
4. SELECT NEXT until desired
feature choice is displayed.
5. SELECT one of the buttons below
currently displayed selections to
choose desired selection.
6. RESPOND to any menu prompts
associated with feature (such as
designating a Zone for PAGE).
7. PRESS programmable button for
storage location.
8. SELECT PREV OR NEXT until
next feature choice is displayed or
until EXIT is displayed.
9. REPEAT last two steps until all
feature buttons are programmed, OR SELECT EXIT to end.
62
Comdial
GCA70-281
Program Button
DND
PRIV
Selecting a Feature
Page
ZONE
ALL
Responding to Selections
Required for Paging
August, 03
NEXT
PREV