Color - Brother PEDESIGN 5.0 Instruction Manual

I

Color

Purpose:
Available:
Operation:
1
Click the button.
Color
A dialog similar to the one shown below appears.
Thread Color
Clear the View Details check box to view a list of only the thread colors.
The setting applies to all the patterns of the same categories that you will create until you change
it. The color button of each category shows the current color for that category.
If a pattern is selected, the setting also applies to that pattern.
NOTE:
For details on specifying a user thread chart or for information on how machines handle thread
colors, refer to "Edit User Thread Chart" on page 225.
See also:
144
Sets the thread color for outline, region inside, text, manual punching pattern and
imported pattern (after the Stitch to Block function has been applied).
When the cursor is in Selection mode with nothing selected, the
buttons are displayed (if they have not been turned off with the
Region color
or buttons).
sew Region sew
When you start one of the drawing modes or Text Input mode, or select an existing
pattern, the Color button for the corresponding pattern appears.
"Line sew" on page 142 and "Region sew" on page 143
N From the Thread Chart list, select a system
chart or a user thread chart.
N From the color list, select the desired color.
(The color can also be selected by double-
clicking it.)
•
Descriptions for the four buttons under the list
are provided in "Special colors" on page 145.
N Click
to confirm.
OK
N Click
to exit.
Cancel
and
Line color
Line