Print - Brother PEDESIGN 5.0 Instruction Manual

See also:
I

Print

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
File Print
A dialog similar to this will display.
Print
2
Follow the instructions in the Windows manuals and in the manuals of your printer for the next
operations.
Depending on the
position.
Printing a Design Page for a multi-position embroidery frame (130 × 300 mm, 300
× 130 mm, 100 × 172 mm, or 172 × 100 mm)
If a Design Page for a multi-position embroidery frame is selected, each section of the design is printed
on a separate page.
If a 130 × 300 mm or 300 × 130 mm Design Page is selected, the design is divided into sections of
•
130 × 180 mm or 180 × 130 mm and each section is printed on a separate page.
If a 100 × 172 mm or 172 × 100 mm Design Page is selected, the design is divided into sections of
•
100 × 100 mm and each section is printed on a separate page.
Printing a Design Page for a multi-position embroidery frame
When is selected:
Actual Size
1
Prints the entire Design Page at actual size
(However, for a 130 × 300 mm or 300 × 130 mm Design Page, a reduced image of the Design
Page is printed.)
2
Prints the pattern in the section of the Design Page that would be sewn with the first embroidery
frame installation position
3
Prints the color order for the pattern in the section of the Design Page that would be sewn with the
first embroidery frame installation position
4
Prints the pattern in the section of the Design Page that would be sewn with the second embroi-
dery frame installation position
164
"Print Setup" on page 161, "Print" below and "Design Property" on page 223
Prints your Design Page and some sewing information.
+
Ctrl P
No button for this function
.
setting, one or two pages will be printed for one pattern or one hoop
Print Type
N Make the necessary setting.
N Click
to print.
OK
N Click
to exit.
Cancel
N Click
to change the default
Properties
settings of the printer.