Brother PEDESIGN 5.0 Instruction Manual page 199

2
In the Select Mask dialog, click
one shown below.
Sewing Option:
Line Interval
Max. Density
Auto Select Setting:
Thread Chart
Color Set
Auto Select:
Click this button to select from the selected thread chart the thread colors closest to the four colors
in the selected color set. The selected thread colors appear in the Use Color List mentioned below.
This button can be clicked if the settings for Auto Select Setting have been changed.
Use Color List:
Allows the selected thread colors to be checked and edited.
to display the Photo Stitch Parameters dialog similar to the
Next
Specifies the interval of parallel lines used to create embroidery data.
Range: 1.2 - 5 mm (0.05 - 0.2 inch)
Default: 2 mm (0.08 inch)
Specifies the maximum density for areas of the created embroidery data
sewn with the zigzag stitch. The embroidery data will be created with a
density smaller than that set here.
Range: 2.5 - 5 lines per mm (64 - 127 lines per inch)
Default: 3 lines per mm (76 lines per inch)
Selects the thread chart for selecting the thread color with the Auto
Select function.
The most appropriate thread color from the selected thread chart is
selected.
A user thread chart can also be selected.
Sets the combination of four colors used when creating embroidery
data.
The color choices are: cyan (C), magenta (M), yellow (Y), black (K), red
(R), green (G) and blue (B). Select one of the following combinations
that contains the colors most used in the image.
Color combinations: CMYK, RGBK, CRYK, BMYK
N Specify the settings for creating Photo Stitch
data.
N Click
to return to the previous dia-
Previous
log.
N Click
to apply the settings to the Photo
Next
Stitch data, and display the next dialog.
N Click
to close this dialog.
Cancel
Line interval
191