Using Design Center - Brother PEDESIGN 5.0 Instruction Manual

In this section, we are going to create an embroidery pattern. That pattern will be created by automatic
retracing of an image. This pattern will be used later as the stepping stone to creating a more complex
embroidery picture.
The complete procedure will take us through the different steps of a normal working session with Design
Center and will introduce you to its most important features.
Please follow these instructions step by step, in the sequence given. If you have to interrupt your training
for any reason, it is recommended to save the file (see Step 9). You will be able to retrieve it later and
resume your work.
Step 1 Starting Design Center
Step 2 Opening an Image
Step 3 Converting to Line Image
Step 4 Editing Lines
Step 5 Converting to Figure Handle Image
Step 6 Moving to Sew Setting
Step 7 Setting Sewing Attributes
Step 8 Previewing the Image
Step 9 Saving the File
16

Using Design Center

page 17
page 18
page 19
page 20
page 22
page 23
page 23
page 28
page 28