Table of Contents
Advertisement
Fill stitch only:
Step Pitch
Frequency
Programmable fill stitch only:
Pattern
Pattern Size
Offset
Direction
Motif Stitch only:
Use Pattern
Pattern
Pattern Size
208
Sets the pitch of the steps.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 4 mm (0.16 inch)
Sets the spacial frequency steps.
Range: 0 - 99%
Default: 30%
Select a pattern for Programmable Fill Stitch.
Click
Select Pattern
folder containing the pas file you want to open. Scroll through
the available stitch patterns and double-click the desired pat-
tern or click
Sets the stitch pattern width.
Width
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Sets the stitch pattern height.
Height
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Sets the offset arrangement of the pattern, and sets the direc-
Direction
tion of offset as Row/Column.
When the pattern's arrangement is offset, sets the amount of
offset.
Value
Range: 0 - 99%
Default: 0%
Allows you to rotate the angle of the stitch patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Selects whether to use pattern 1 or pattern 2 for Motif. If you
choose to use both patterns, the data is created so that sewing
is alternated between them after each row.
Pattern1 only: Uses only pattern 1 (Default)
Pattern2 only: Uses only pattern 2
Pattern1 and 2: Uses pattern 1 and pattern 2
Select a pattern for Motif sewing.
Click
Select Pattern
the folder containing the
through the available stitch patterns and double-click the
desired pattern or click
Sets the pattern width (the direction along the line).
Width
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
Sets the pattern height (the direction perpendicular to the line).
Height
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
, and the
Browse
to select the pattern
OK
, and the
Browse
file you want to open. Scroll
pmf
to select the pattern.
OK
Step pitch
0%
30%
dialog opens. Select the
dialog will display. Select
Advertisement
Table of Contents
