Use Color List - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 123 Thursday, July 8, 2004 11:59 AM
Layout & Editing
Sewing Option
Specifies the interval between parallel
lines used to create the embroidery
pattern.
Range: 1.2 to 5 mm (0.05 to 0.2 inch)
Line Interval
Default: 2 mm (0.08 inch)
Specifies the maximum density for
areas of the created embroidery pattern
sewn with the zigzag stitch. The
embroidery pattern will be created with
Max. Density a density smaller than that set here.
Range: 2.5 to 5 lines per mm (64 to 127
lines per inch)
Default: 3 lines per mm (76 lines per
inch)
Auto Select Setting
Selects the thread chart for selecting
the thread color with the Auto Select
function.
The most appropriate thread colors
Thread Chart
from the selected thread chart are
selected.
A user thread chart can also be
selected.
Sets the combination of four colors used
when creating the embroidery pattern.
The color choices are: cyan (C),
magenta (M), yellow (Y), black (K), red
(R), green (G) and blue (B). Select one
Color Set
of the following combinations that
contains the colors most used in the
image.
Color combinations: CMYK, RGBK,
CRYK, BMYK
Auto Select
Click this button to select from the selected
thread chart the thread colors closest to the
four colors in the selected color set. The
selected thread colors appear in the Use
Color List mentioned below.
This button can be clicked only if the settings
under Auto Select Setting have been
changed.
Inputting Images and Embroidery Patterns

Use Color List

This list allows the selected thread colors to be
checked and edited.
Use Color
List
Change
Line interval
Color
6.
In the Photo Stitch 2 Parameters dialog box,
click Next.
→ A Preview dialog box similar to the one
shown below appears, allowing the creat-
ed embroidery pattern to be previewed.
b
• To return to the previous dialog box, click
Previous.
• To quit the operation and close the dialog
box, click Cancel.
7.
Click Finish.
→ An embroidery pattern is created and dis-
played in the Design Page.
Displays the four selected thread colors.
In the list, select the color that you want
to change, and then click this button to
open the Thread Color dialog box,
which lets you change the thread color
used in the embroidery pattern.
Memo:
123