Brother PEDESIGN 5.0 Instruction Manual page 219

Operation:
1
Click , then
Sew Sewing Order
A dialog similar to the one shown below appears. The dialog can be made longer so that all parts
of the pattern can be viewed.
Selecting data:
Select a pattern by clicking it. The selected pattern is framed with a thick line and the correspond-
ing area in the Design Page is surrounded with a dotted line.
To select multiple patterns, hold down the
addition, multiple patterns can be selected by dragging the pointer over them.
Changing the sewing order:
The sewing order can be changed by selecting a pattern and dragging it to the desired location.
The destination location is indicated by the red line while the pattern is being dragged, and the
selected data is moved to the indicated location once the pattern is released.
Changing the color:
Select a pattern, and then click
to be changed.
NOTE:
The frames around whole objects (with no hole settings applied) or objects with no sewing settings
applied will be a dotted line. In addition, there will be no number for the sewing order below the
frame.
.
N Click
frame.
N Click
of the same color that will be sewn together. If
multiple patterns are displayed in a frame, a
plus sign (+) appears beside the number of
that frame.
N Click
dialog.
N Click
ing the settings.
Shift
In addition, after a pattern is selected, its sewing
order can be changed by clicking the following but-
tons.
N Click
beginning of the sewing order.
N Click
one position in the sewing order.
N Click
one position in the sewing order.
N Click
end of the sewing order.
to display the
Thread Color
to enlarge each pattern to fill its
to display in one frame all patterns
to apply the settings and close the
OK
to close the dialog without chang-
Cancel
and keys while clicking the patterns. In
Ctrl
to move the selected pattern to the
to move the selected pattern ahead
to move the selected pattern back
to move the selected pattern to the
dialog that allows the thread color
211