Brother PEDESIGN 5.0 Instruction Manual page 170

Operation:
1
Click , then
File Print Setup
A dialog similar to this will display.
Print Setup
You can choose to print the preview image on one or two pages for one pattern or one hoop position.
The
Actual Size
The image in its actual size on the first and the dimensions of the embroidery, the sewing color
order and the needle count on the second page. The file name is printed on both pages.
The
Reduced Size
on a single page.
NOTE:
If a Design Page for a multi-position embroidery frame (130 × 300 mm, 300 × 130 mm, 100 × 172
mm, or 172 × 100 mm) is selected, each Print type will print the whole image of Design Page on
the first page.
And in this case, the number of pages depends on your design.
Print sewing area box & center axes
Select
Print sewing area box & center axes
"Select Sewing Area") and the center axes for the data.
This setting is only available when
Print template grid
Select
Print template grid
included with the embroidery frame.
NOTE:
The size of the grid that is printed may be slightly different from the grid printed on the embroidery
sheets for some embroidering machines.
If is set to
Stitch Image
If is set to
Stitch Image
NOTE:
To change the settings of a realistic image, click
See "Realistic Preview Attribute Setting" for more details.
These attributes are stored separately from the Realistic Preview attributes.
See also:
162
.
will print two pages:
will print a reduced illustration of the image and all the above mentioned items
Actual Size
to print green lines to represent the grid printed on the embroidery sheet
, the pattern is printed as lines and dots.
Normal
, the pattern is printed as a realistic image.
Realistic
"Realistic Preview Attribute Setting" on page 221
N Click
properties.
N Choose the appropriate
and
N Choose the
Option
sewing information.
N Click
N Click
to print black lines to indicate the sewing area (see
is selected.
.
Attributes
to set the printer
Properties
Paper
settings.
Orientation
and
Print type
of the preview image and
to confirm the settings.
OK
to exit.
Cancel
Print