Hole Sewing Mode; Zoom-In Mode; Fit Design Page To Window; Zoom-Out Mode - Brother PEDESIGN 5.0 Instruction Manual

Hole Sewing Mode

The hole sewing mode is used to avoid sewing overlapping areas twice. It can be set only when one of
the overlapping areas is completely enclosed in another area.
1
Click on the Tool Box.
The shape of the cursor changes to
Box button.
2
Click on the enclosing part of a pattern comprised of a region completely enclosed into another one.
3
This dialog will display.

Zoom-in Mode

The zoom-in mode is used to magnify a part of the outline so that you can inspect it and edit it more easily.
1
Click on the Tool Box. The shape of the cursor changes to
2
Click on the area you want to enlarge or drag the cursor across the area that you want to enlarge,
then release it. You can repeat this step several times.

Fit Design Page to Window

This feature allows you to maximize the selected Design Page so that it will fit in the window.
1
Click on the Tool Box. The Design Page is enlarged or shrunk automatically to fit the window.

Zoom-out Mode

The zoom-out mode is used to return to the normal display after zooming in.
1
Click on the Tool Box. The shape of the cursor changes to
2
Click on the area you want to shrink or drag the cursor across the area that you want to shrink,
then release it. The image shrinks toward that point. You can repeat this step several times.
76
and is displayed together with a small figure of the Tool
N Click on the central region to toggle hole sew-
ing on/off.
N Click
to set hole sewing.
OK
N Click
to exit without setting hole sewing.
Cancel
.
.