Fit Text To Path Setting - Brother PEDESIGN 5.0 Instruction Manual

Aligns several lines of text to the left, cen-
Alignment
ter or right.
Specifies whether characters will be posi-
Direction
tioned horizontally or vertically.
NOTE:
The vertical letters will be displayed in a vertical manner on design page.
NOTE:
Both and
Kerning Character Spacing
is always applied to the entire text pattern, while
acter Spacing
characters. If you apply
"Selecting characters on a text pattern" on page 123 for more details about selecting individual char-
acters in a text pattern.
See also:
I

Fit Text to Path Setting

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Select a line of text and a path.
2
Click , then
Text Fit Text to Path Setting
set the spacing between characters. The difference is that
to the entire text pattern, it works exactly like
Kerning
"Fit Text to Path Setting" below and "Transform Text" on page 201
Fits a line of text along a path.
+
Ctrl T
.
Center
Horizontal
can be applied to individual
Kerning
N Select
and
Horizontal
.
Text Orientation
N Check
the other side
to be reversed.
N Click
to confirm the setting.
OK
N Click
to exit.
Cancel
Right
Vertical
Char-
. See
Character Spacing
and
Vertical Alignment
if you want the characters
199