Brother PEDESIGN 5.0 Instruction Manual page 34

For the leaves:
Click the
Region color
dialog, then select the
The
Region color
Click the
Region sew type
To set the characteristics of the fill stitch, click
the submenu. You can also click the button of the Toolbar shown below.
The
Sewing Attribute Setting
N Set the direction of the fill stitch as explained in the "NOTE" below.
N Click on the regions of the leaves to which you want to apply a setting.
N Repeat the same operation for each stitch direction.
NOTE:
Using different directions for different regions can add contrast and improve the appearance of the
embroidery.
Set the direction to 45˚ and click.
NOTE:
To be able to apply the sewing settings to a region, the region has to be closed. If you cannot apply
any setting to a given region, go back to the Figure Handle stage and make sure that region is closed.
Edit any faulty line with the Point Edit tool. For details on how to edit the figure handle image, see
"Point Edit Mode" on page 68.
26
button on the Sewing Attributes bar to display the
color.
LEAF GREEN
button shows the selected color.
selector
dialog appears. The dialog displays the default settings for the region stitch.
Set the direction to 90˚ and click.
on the Sewing Attributes bar, then click
on the menu bar, then click
Sew
Set the direction to 135˚ and click.
Region Thread Color
.
Fill Stitch
on
Sewing Attribute