Brother PEDESIGN 5.0 Instruction Manual page 106

Direction
Pull Compensation
Fill stitch only:
Step Pitch
Frequency
Programmable fill stitch only:
Pattern
Pattern Size
Offset
Pattern Direction
98
Specifies the type of sewing direction.
Constant: Sews at a fixed angle. The angle is specified by the
Type Angle setting.
Variable: Varies the sewing direction according to the object
being sewn.
Specifies the sewing angle.
(If
Variable
Angle available.)
Range: 0 - 179 degrees
Default: 45 degrees
Lengthens the sewing region in the stitch pattern's sewing direction to pre-
vent pattern shrinkage during sewing.
Range:0 - 2 mm (0.00 - 0.08 inch)
Default:0 mm (0.00 inch)
Sets the pitch of the steps.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 4.0 mm (0.16 inch)
Sets the spacial frequency steps.
Range: 0 - 99%
Default: 30%
Select a pattern for Programmable Fill Stitch.
Click
Select Pattern
folder containing the pas file you want to open. Scroll through
the available stitch patterns and double-click the desired pat-
tern or click
Sets the stitch pattern width.
Width Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Sets the stitch pattern height.
Height Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Sets the offset arrangement of the pattern, and sets the direc-
Direction
tion of offset as Row/Column.
When the pattern's arrangement is offset, sets the amount of
offset.
Value
Range: 0 - 99%
Default: 0%
Allows you to rotate the angle of the stitch patterns.
Range: 0 - 359 degrees
Default: 0 degrees
is selected as the
Type
, and the
Browse
to select the pattern.
OK
setting, this setting is not
90˚
135˚
179˚
Step pitch
0%
30%
dialog opens. Select the
45˚
0˚