Table of Contents
Advertisement
4
Change the row offset. Under the
"50%", and holding the mouse button down on either arrow or by typing the value directly in the
edit box window.
NOTE:
You can only choose to change either the row or the column offset for a given pattern. You cannot
select both for the same stitch pattern.
5
Change the direction of the pattern. Rotate the pattern to the right by clicking on the "down" arrow
until a value of
340 degrees
•
For more information on the different settings of a programmable stitch, see "Sewing Attribute
Setting" on page 204.
6
Click
.
Apply
The stitch and its settings are set. Until they are changed again, those sewing settings, just like
any other, will be applied to every new region that you draw.
7
Finish setting the remaining sewing attributes for the ray pattern that you will create in the following
step.
Select a region color using the
8
Select a line color and stitch using the
. (You can also set the characteristics of the pitch in the
ing Attribute Setting
44
category, set the
Offset
is selected. The
Region color
Line color
dialog.)
Direction
Sewing Attribute Setting
button.
button and the
as
and set the value at
Row
dialog will look like this:
selector
Line sew type
tab of the
Line sewing
Sew-
Advertisement
Table of Contents
