Brother PEDESIGN 5.0 Instruction Manual page 155

2
Click the desired stitch.
The setting applies to all the patterns of the same categories that you will create until you change it.
If a pattern is selected, the setting also applies to that pattern.
NOTE:
You can set the stitch attributes for the selected line and region stitches in the
dialog.
ting
When you select
Prog. fill Stitch
dialog, as there is no default programmable stitch setting.
Attribute Setting
See also: "Line sew" on page 142, "Region sew" on page 143 and "Sewing Attribute Setting"
on page 204
or , you also need to select a pattern in the
Motif Stitch
Sewing attribute Set-
Sewing
147