Point Edit Mode; Moving Points - Brother PEDESIGN 5.0 Instruction Manual

Point Edit Mode

The point edit mode is used to:
N move a point of a broken line, a curve, an arc, fan shape and arc & string or of a manual punching pat-
tern;
N reorient the tangent to a point of a curve;
N insert a new point in a broken line, curve or manual punching pattern;
N delete a point in a broken line, curve or manual punching pattern;
N realign the part of a broken line or a curve on both sides of a point;
N select and set a character in a text pattern.
N move, insert or delete stitch data of a stitch object
N edit the entry points and exit points of stitching for a shape object
I

Moving points

1
Click on the Tool Box.
Three buttons appear:
2
Click . The shape of the cursor changes to
3
Click the pattern that you want to edit.
The pattern can be a broken line, a curve, an arc, a fan shape, an arc & string or a manual punch-
ing pattern.
The existing points of the pattern are marked with small empty squares
4
Click the point that you want to move.
The selected point is marked with a small black square.
You can select more than one point by clicking them while holding the
dragging the mouse across the area.
NOTE:
If you click on the line of the pattern instead of a square, a new point is inserted.
5
Drag the point to a new position.
All the selected points move in the same direction if more than one is selected.
The point remains selected, so that you can drag it again.
120
.
.
key down, or by
Ctrl