Brother PEDESIGN 5.0 Instruction Manual page 213

2
Click , then
Sew Sewing Attribute Setting
A Sewing Attribute Setting dialog similar to this will display.
You can change the size of this dialog as you like.
Sewing attribute display area: Displays the present settings for each of the sewing attributes.
Selected pattern display area: When a pattern for Programmable Fill or Motif sewing is selected,
Edit box:
Hint image display area:
Line sewing attributes
Setting items according to the selected stitch
Zigzag stitch
Line sewing
Zigzag width
Density
Zigzag width
Density
.
Sewing attribute
display area
Selected pattern
display area
Edit box
Hint image display area
that pattern is displayed.
Displays the setting values to be changed for the item selected in
the Sewing attribute display area.
When set to display a hint, a hint image showing the settings in the
edit box is displayed.
Running stitch
Line sewing
Run pitch
Run times
Sets the width of the zigzag.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Sets the number of lines per mm (inch).
Range: 1 - 7 lines per mm (25 - 178 lines per inch)
Default: 4.5 lines per mm (114 lines per inch)
N Select the item you want to change or
set in the Sewing attribute display
area, then enter the change or setting
in the edit box.
N The method for entering the setting
varies according to the item. If enter-
ing numerical values, you can click on
the arrow buttons to select values or
enter the values directly. If the Default
button is displayed in the Edit box,
click the button to apply the Default
setting to the selected item.
N Click
to confirm the setting.
Apply
N Click
to exit.
Close
N Click Show Hint/Hide Hint to turn the
hint image display on or off.
Manual Punch
Line sewing
Run pitch
Motif stitch
Line sewing
Run pitch
Motif
Pattern
Pattern size
Width
Height
H-Arrange
V-Arrange
205