Scaling Patterns; Flipping A Pattern Horizontally Or Vertically - Brother PEDESIGN 5.0 Instruction Manual

• The arrow keys cannot be used to move text on a path if just the text is selected. The path must
also be selected in order to move using the arrow keys.
I

Scaling patterns

1
Move the cursor over one of the handles of a selected pattern or group of selected patterns.
The shape of the cursor will change to
cursor is on.
2
Drag the handle in the direction of the arrow to scale the pattern.
is for scaling the width.
is for scaling the height.
and are for scaling both dimensions at the same time.
As you drag the handle, you can check the changing size on the Status bar.
Note that some patterns imported from cards cannot be scaled.
When you scale imported patterns, the number of stitches remain the same, resulting in a quality
loss. To maintain the quality of the embroidery, you need to adjust the number of stitches after
scaling the pattern. This can be done in the
selecting the
Sew – Stitch to Block
see "Stitch to Block" on page 213.
I

Flipping a pattern horizontally or vertically

1
Select the data that you wish to flip horizontally or vertically. The buttons below become active.
2
To flip horizontally, select the command
To flip vertically, select the command
NOTE:
Images imported from embroidery cards cannot be flipped if they were designed with the mirror
function turned off.
118
, ,
Stitch to Block Sensitivity
command. For more information on how to select this function,
Edit – Mirror – Horizontal
Edit – Mirror – Vertical
or , depending on the handle the
dialog, which you open by
or click on the Toolbar.
or click on the Toolbar.