Deleting Points; Realigning - Brother PEDESIGN 5.0 Instruction Manual

3
Click the pattern that you want to edit.
The pattern can be a broken line, a curve or a manual punching pattern.
The existing points of the pattern are marked with small empty squares.
4
Click at a point of the contour other than an existing point.
A new point appears and is automatically selected (marked with a small black square and in the
case of a curve, with a control handle).
When a manual punching pattern is selected, a pair of new points is inserted.
The new point can be immediately moved. In the case of a new point on a curve, you can also use
the handle to reorient the tangent to the new point.
4
I

Deleting points

1
Click on the Tool Box.
Three buttons appear:
2
Click . The shape of the cursor changes to
3
Click the pattern that you want to edit.
The pattern can be a broken line, a curve or a manual punching pattern.
The existing points of the pattern are marked with small empty squares.
4
Click the point that you want to delete.
The selected point is now marked with a small black square.
You can select more than one point by clicking them while holding the
dragging the mouse across the area.
5
Press the Delete
selected, a pair of points is deleted.
4
I

Realigning

1
Click on the Tool Box.
Three buttons appear:
122
.
key to remove the point from the path. When a manual punching pattern is
Delete
5
.
.
Ctrl key down, or by