Modify - Brother PEDESIGN 5.0 Instruction Manual

Operation:
1
Click , then
Image
A dialog similar to this will display.
2
From the devices in the display, select which device to use and highlight that device.
N Click
to choose the selected device and close the dialog.
Select
N Click
to ignore the operation done to change the device and close the dialog.
Cancel
NOTE:
If there is no TWAIN device installed, there will be no names displayed on the Sources list.
Use this function after installing the driver software for the TWAIN device you want to use.
I

Modify

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
Image
The image to be edited will appear surrounded with a red line and handles.
In addition, the size of the image data is displayed in the status bar.
Moving an image:
Move the cursor over an image. The shape of the cursor will change to
Drag the image to the desired location.
Scaling an image:
Move the cursor over one of the handles. The shape of the cursor will change to
or , depending on the handle the cursor is on.
Drag the handle in the direction of the arrow to scale the image.
is for scaling the width.
is for scaling the height.
and are for scaling both dimensions at the same time.
180
.
Select TWAIN device
Adjusts the size and position of the image data.
No shortcut key for this function
No button for this function
.
Modify
.
, ,