Brother PEDESIGN 5.0 Instruction Manual page 105

Line sewing attribute
Setting items according to the selected stitch
Zigzag stitch
Line sewing
Zigzag width
Density
Zigzag width
Density
Run pitch
Run times
Region sewing attribute
Setting items according to the selected stitch
Satin stitch
Region sewing
Under sewing
Density
Direction
Type
Angle
Pull compensation
Cross stitch
Size
Times
Under Sewing
Density
Running stitch
Line sewing
Run pitch
Run times
Sets the width of the zigzag.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Sets the number of lines per mm (inch).
Range: 1 - 7 lines per mm (25 - 178 lines per inch)
Default: 4.5 lines per mm (114 lines per inch)
Sets the pitch of the line sewing.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Sets the number of times the border will be sewn.
Range: 2, 4, 6
Default: 2
Fill stitch
Region sewing
Under sewing
Density
Direction
Type
Angle
Pull compensation
Step pitch
Frequency
Sets Under Sewing on/off. Try to use Under Sewing for wide areas, in order
to prevent shrinking during stitching. Depending on the shape of the region,
however, it may not be possible to make this setting.
On: Under Sewing will be done
Off: Under Sewing will not be done
Sets the number of lines per mm.
Range: 1 - 7 lines per mm (25 - 178 lines per inch)
Default: 4.5 lines per mm (114 lines per inch)
Programmable fill
Region sewing
Under sewing
Density
Direction
Type
Angle
Pull compensation
Programmable Fill
Pattern
Pattern size
Width
Height
Offset
Direction
Value
Direction
Motif stitch
Region sewing
Motif
Use Pattern
Pattern1
Pattern
Pattern size
Width
Height
H-Arrange
V-Arrange
Pattern2
Pattern
Pattern size
Width
Height
H-Arrange
V-Arrange
Row offset
Direction
Run pitch
97