Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual page 57

Chapter 3 Configuring the Cisco TelePresence System
Figure 3-8 Cisco Unified Communications Manager Settings
Configure Cisco Unified CM settings using the information in
Step 2
The Apply and Reset buttons become active when a value is entered in this field.
Note
Table 3-2
Field
Use Configuration TFTP Server
TFTP Server 1 through 5
Cisco Unified Communications
Manager 1 through 5
CAPF Authentication String
Certificate Trust List (CTL)
Step 3 Click Apply to register new or modified settings.
Step 4 Click Reset to restore the original settings.
OL-21845-01
Cisco Unified Communications Manager Settings
Settings
Click Automatic to set the default condition, which is that the
•
TFTP server will reply to DHCP requests for option 150, or for
a list of TFTP servers that indicate to endpoints in the network
where to find Cisco Unified CM configuration files.
• Click Specify to manually supply IP addresses of TFTP servers
in the interactive fields provided.
Click Specify at Use Configuration TFTP Server to activate
interactive fields that are provided for entering TFTP server IP
addresses.
Display-only report that shows the names of up to five
Cisco Unified Communications Managers.
Enter the Certificate Authority Proxy Function authentication
string. The characters entered in this field must match the CAPF
Authentication string entered in Cisco Unified CM.
The Delete CTL button becomes active when the CTS is provided
with a CTL by a Cisco Unified CM configured in mixed
authentication mode.
Click Delete CTL to delete all entries on the CTL.
Cisco Unified Communications Manager Settings
Table 3-2.
Cisco TelePresence System Administration Guide
3-13