Adjusting Your Display - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual

Managing CTS 1300 Hardware Setup

Adjusting Your Display

To adjust a display:
Log in to the Cisco TelePresence System Administration interface.
Step 1
Choose Troubleshooting > Hardware Setup.
Step 2
Click the Displays radio button. A test image appears on the screen.
Step 3
Click Start in the Testing box to start the adjustment process.The Current Color Temperature test screen
Step 4
appears, as shown in
Each display in the meeting room should be showing a set of horizontal grey bars and that display's
Note
relative position. The current color temperature setting is displayed.
Figure 8-3
Step 5 Select the color temperature of the lighting in the meeting room from the drop-down menu. The Apply
button is activated.
Step 6 Click Apply.
Step 7 Click Stop to stop the test.
Cisco TelePresence System Administration Guide
8-6
Figure 8-3.
Color Temperature Test Screen
Chapter 8 Troubleshooting the CTS 1300
OL-21845-01