Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual page 17

Telepresence system
Hide thumbs Also See for CTS 1000 - TelePresence System 1000 Video Conferencing:
Table of Contents

Advertisement

What's in This Guide
DHCP Connectivity
Provide a Dynamic Host Configuration Protocol (DHCP) server to achieve connectivity. CTS uses
DHCP by default.
Unified Communications Manager and MIDlets Download
Make sure that Cisco Unified CM is running and is using supported software for your release. For
complete Cisco TelePresence software compatibility information, see the software support matrix on the
Cisco TelePresence Administration Software
http://www.cisco.com/en/US/products/ps8332/products_device_support_tables_list.html
To enable all available features on your CTS Cisco Unified IP phone, you must download and configure
Note
MIDlets. The supported MIDlet version is embedded in the software files that are available when you
click Download Software on the
URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Or navigate to Products > Voice and Unified Communications > IP Telephony > Call Control >
Cisco Unified Communications Manager (CallManager) > Cisco Unified Communications
Manager Version x.x > Unified Communications Manager/CallManager Device Packages.
Check the following:
Note
Cisco Unified IP Phone Requirements
Each Cisco TelePresence/IP phone combination takes 11 units of the Cisco Unified CM unit license:
OL-21845-01
CTS.1-7-2-1-2R-K9.P1.sbn 
Release Date: 09/MAY/2011 
Cisco TelePresence System Software for CTS500, CTS1000, CTS1100, CTS1300, CTS3000,
CTS3010, CTS3200 and CTS3210 
Size: 45240.42 KB (46326180 bytes)
The Cisco TelePresence device name in Cisco Unified CM follows the following format: The
characters "SEP" followed by the device MAC address. Assign the hostname so that it is resolvable
by Domain Name System (DNS), for example:
MAC address: " 00:0D:D1:23:45:A1 "
Cisco TelePresence Host Name: " SEP000DD12345A1 "
DNS (domain) is optional.
—5 units for the Cisco Unified IP Phone 7970/7975
—6 units for the Cisco TelePresence unit.
CTS and the Cisco Unified IP Phone are both configured in Cisco Unified CM as a shared line.
page at the following URL:
Cisco Unified Communications Manager Support
Cisco TelePresence System Administration Guide
page at the following
iii

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Cts 3210Cts-3010

Table of Contents