Intel BX80623G530 Specification page 45

2nd generation intel core processor family desktop, intel pentium processor family desktop, and intel celeron processor family desktop, specification update
Table of Contents

Advertisement

BJ81.
Execution of BIST During Cold RESET Will Result in a Machine Check
Shutdown
Problem:
If BIST (Built In Self-Test) is enabled and a Cold RESET follows, an unrecoverable
machine check shutdown will occur.
Implication:
Due to this erratum, BIST cannot be enabled.
Workaround:
None identified.
Status:
For the steppings affected, see the Summary Tables of Changes.
BJ82.
PCI Express* Differential Peak-Peak Tx Voltage Swing May Violate the
Specification
Problem:
Under certain conditions, including extreme voltage and temperature, the peak-peak
voltage may be higher than the specification.
Implication:
Violation of PCI Express Base Specification of the VTX--DIFF-PP voltage. No failures
have been observed due to this erratum.
Workaround:
None identified. Sugar Bay and Bromolow-WS
Status:
For the steppings affected, see the Summary Tables of Changes.
BJ83.
PCIe* Presence Detect State May Not be Accurate After a Warm Reset
Problem:
Under certain conditions, when there is no PCIe device present, the status of Presence
Detect State bit (SLOTSTS Device 1; Function 0,1,2; Offset BAH; bit [6] and/or Device
6; Function 0; Offset BAH; bit [6]) may not be accurate after a warm reset.
Implication:
The Presence Detect State bit may incorrectly report a PCIe device is present even
though no device is actually present, which may result in a system hang.
Workaround:
A BIOS code change has been identified and may be implemented as a workaround for
this erratum.
Status:
For the steppings affected, see the Summary Tables of Changes.
BJ84.
Display Corruption May be Seen After Graphics Voltage Rail
(VCC_AXG) Power Up
Problem:
Powering up the processor graphics logic in the cases of initial poweron or Sx resume
state power up may cause a nondeterministic state in the processor graphics logic.
Implication:
This erratum may cause improper 3D rendering and may result in display corruption.
Workaround:
A graphics driver workaround has been identified and may be implemented as a
workaround for this erratum.
Status:
For the steppings affected, see the Summary Tables of Changes.
Specification Update
45

Advertisement

Table of Contents
loading

Table of Contents