Tray Cover Removal; Tray Cover Attachment - Ricoh TH-C1 Technical Bulletin

T B
echnical ulletin
PAGE: 3/3
Model: Date: No.:
Model TH-C1 13-Dec-05 RB156019

TRAY COVER REMOVAL

A
C
B
D
E
Remove the tray cover [A] by pressing on the two pawls [B] on the left side of the cover.

TRAY COVER ATTACHMENT

NOTE: The right side of the tray cover should be attached first.
1. Make sure the 6 idler wheels [F] are in the U-type slots.
2. Fit the pawls [C] (just below the cover fin) around the thin bar [D] on the shift tray.
3. Align the square [E] so that it fits into the groove in the underside of the tray cover and
does not interfere with the attachment of the cover.
4. Complete the attachment by inserting the left side pawls [B] into place.
F