Table of Contents
Advertisement
User Manual
11 Debug Interface
The simualtor supports Linux and Windows
the GDB interface to debug on Linux based hosts. The kernel debugger interface can be
used to debug on Windows based hosts.
11.1 Kernel Debugger
This only applies to the Windows
The simulator can interact with the kernel debugger through:
EXDI interface (see Section 7.20, "EXDI Server Device", on page 104).
Serial port connection.
The serial ports can be configured so that any data read from or written to the simulated
serial ports is made available to the host machine. The serial ports can each be configured
to do this using either a named-pipe, or the actual serial port hardware.
The automation commands "GetCommPort" and "SetCommPort" are used for this
purpose, see Section A.7.10, "Serial", on page 238.
Use the serial ports "SetCommPort" command to set the simulated serial port to use a
specific COM port. For example, to set the second serial port in the simulation to use
COM4 for its communication, you would type
Serial:1.SetCommPort COM4 57600
The simulator will program the appropriate COM port (COM4 in the above example) to
57600 baud, 8 bits, no parity, 1 stop bit, no flow control.
All characters transmitted by the simulation through the serial port (second serial port in
the above example) will be sent out to the given COM port (COM4 in the above
example). In the same manner, all data received by the simulator through the given COM
port (COM4 in the above example) will appear as received data in the simulated COM
port.
To set the simulated serial port (COM1) to use a named-pipe you would type
Serial:1.SetCommPort pipe
The simulator will program the appropriate COM port (COM1 in the above example) to
use the named-pipe "\\.\pipe\SimNow.Com1" on the host to transfer data between host
and the simulated machine.
Chapter 11: Debug Interface
AMD Confidential
®
based debugging. It is recommended to use
®
version of the simulator and not to the Linux version.
th
September 12
, 2008
151
Advertisement
Table of Contents
