AMD SimNow Simulator 4.4.4 User Manual page 123

User Manual
</Init>
APIC initialization information.
<INSTR Device="CPU0" Type="FJMP" ICount="6778" JMP="1" RIP="f86b0619" />
An FJMP Instruction. RIP is optional and is only used to double check whether if the
FJMP is taken at the correct instruction. JMP attribute can have the following values:
JMP=0: Force Do-not-take-jump for this instruction
JMP=1: Force Take-jump for this instruction
<Event Device="CPU0" Type="IOW" ICount="6817" Address="a038" Size="2">
<Data Length="2" Value="40af" />
</Event>
Defines an IOR or IOW dormant event.
<Event Device="CPU0" Type="DMAW" ICount="8403" Address="000000000c254340"
Length="64">
<Data Length="64"
Value="6d00005f5e5bc3909ac04600b7c04600d4c04600eec0460008c1460022c146003cc146
002fc2460067c2460085c24600a3c24600909090909090909090909090" />
</Event>
Defines a DMAW event.
<Event Device="CPU0" Type="PIN" ICount="325496" Name="INTR" Level="A" />
Defines an INTR PIN event. Level="A" for Asserted or "D" for Deasserted. Name could
be INTR, RESET, A20M, NMI, PAUSE, SMI, and <Unknown>.
<Event Device="TO_DO_IN_NB" Type="APIC" ICount="325496" Name="EXTINT"
DestinationMode="F" DeliveryMode="07" Level="F" TriggerMode="F" Vector="00"
Destination="00" />
Defines an APIC Event. Name could be EOI, INIT, STARTUP, SMI, NMI, INTR,
REMOTE READ, EXTINT, LPARB, and Unknown. Device can be the name of the
device that issues the interrupt. Current XTR implementation ignores the name of the
device.
<Event Device="CPU0" Type="INTACK" ICount="325496" Vector="00000000000000d1" />
Defines an INTACK cycle event.
<Event Device="XTR" Type="EOT" ICount="400001" />
Defines an End of Trace (EOT) event.
<Event Device="CPU0" Type="RDMSR" ICount="1404861740" Address="00000010"
Data="0000000053BC7D2C" />
Defines a RDMSR event.
<Event Device="CPU0" Type="MEMR" ICount="3133971257"
Address="00000000000A88B2" Size="1">
<Data Length="1" Value="FF" />
</Event>
Chapter 7: Device Configuration
AMD Confidential
.
.
.
th
September 12 , 2008
111